I’ve been working on trying to better document the whole flow of code that goes into a build of firmware for an OpenPOWER machine. This is partially to help those not familiar with it get a better grasp of the sheer scale of what goes into that 32/64MB of flash.
I also wanted to convey the components that we heavily re-used from other Open Source projects, what parts are still “IBM internal” (as they relate to the open source workflow) and which bits are primarily contributed to by IBMers (at least at this point in time).
As such, let’s start with the legend of the diagram:
Now, the diagram:
The end thing that a user with a machine will download and apply (or that comes shipped with a box) is the purple “Installable Firmware Release” nodes (bottom center). In this diagram, there are 4 of them. One for POWER9 systems such as the just-announced AC922 system (this is the “OP910 Release” node, which is the witherspoon_defconfig in the op-build tree); one for the p9dsu platform (p9dsu_defconfig in op-build) and one is for IBM FSP based systems such as the S812L and S822L systems (or S812/S822 in OPAL mode).
There are more platforms out there, but this diagram is meant to be simplified. The key difference with the p9dsu platform is that this is produced by somebody other than IBM.
All of these releases are based off the upstream op-build project, op-build is the light blue box in the center of the diagram. We do regular X.Y releases and sometimes do X.Y.Z releases. It’s primarily a pull request based workflow currently, so everything goes via a pull request. The op-build project brings together all the POWER specific firmware components (pretty much everything in every other light blue/blue box) along with a Linux kernel and buildroot.
The kernel and buildroot are the two big yellow boxes on the top right. Buildroot brings together a lot of open source components that are in our firmware image (including some power specific ones that we get through upstream buildroot).
For Linux, this is a pretty simplified view of the process, but we primarily ship the stable tree (with maybe up to half a dozen patches).
The skiboot and petitboot components both use a mailing list based workflow (similar to kernel) as well as X.Y and X.Y.Z releases (again, similar to the linux kernel).
On the far left of the diagram, we have Hostboot, SBE and OCC. These are three firmware components that come from the traditional IBM POWER Firmware group, and are shared with the IBM non-OpenPOWER POWER systems (“traditional” POWER). These components have part of their code from from an (internal) repository called “ekb” which also goes into a (very) low level debug tool and the FSP based systems. There’s also an (internal) gerrit instance that’s the primary place where code review/development discussions are for these components.
In future posts, I’ll probably delve into more specifics of the current development process, and how we may try and change things for the better.
